Engineer III Dreamer
Engineer III Dreamer


ENGINEER III DREAMER
EXTREME READABILITY FOR A VISIONARY CALLING.
Complete unselfishness, enduring commitment and the willingness to dare the impossible. BALL Explorer Dr. Geoffrey Tabin restores sight to millions of people in the developing world. In proud support of his mission, the limited edition Engineer III Dreamer – available in chronometer or non-chronometer models. Featuring the luminosity of 1mm micro gas tube numerals and hour markers alongside the strength of stainless steel and Titanium carbide (TiC coating). Every timepiece will enable the Himalayan Cataract Project, co-founded by Dr. Tabin, to perform three surgeries and change lives forever.
Limited to 1,000 pieces each. Now available for pre-order until 9 January 2019 at an exclusive price.
PRE-ORDER NOW

THE IMPACT OF LIGHT ON LIFE.
Vision and readability are paramount to every BALL timepiece. On the dial, the 6, 9 and 12 numerals and additional hour markers are comprised of 1mm micro gas tubes for unmatched luminosity in all dark environments. On the gents models, the minute track is coated with Super-LumiNova to ensure around the clock brightness. No matter the undertaking, BALL Watch is committed to making the power of light undeniable.










DETAILED DISTINCTION.
The Engineer III Dreamer is equally stylish and robust. In daytime, the 1mm micro gas tubes add a unique depth to the black, blue and green dial choices, making the timepiece eye-catching at any angle. The 40mm and 43mm cases display BALL’s signature toughness, available in stainless steel or Titanium carbide coating (TiC). Both executions result in an easy-to-wear timepiece that enables unfettered freedom of movement. The timepiece also comes in a 31mm ladies model.
The 40mm and 43mm executions are available with COSC certified or non-COSC certified movements, the timepiece delivers rigorously-tested and robustly-protected precision. An anti-magnetic shield protects the movement to 80K A/m (1,000 Gauss) and our patented Amortiser® system withstands intense shock impact, along with 100m water resistance.








10 MINUTES. 2 EYES. 1 LIFE.
In 1983, Dr. Geoffrey Tabin scaled Mt. Everest as an explorer, but came down a visionary for the blind. After summiting Everest, he witnessed a Dutch medical team performing cataract surgery on a blind woman. He had discovered his calling. Years later, Dr. Tabin teamed with Dr. Sanduk Ruit and established the Himalayan Cataract Project. Today, the initiative cures preventable blindness using an innovative eye surgery that costs only $25 and requires 10 minutes. The result is one life changed forever. A portion of the proceeds from every Engineer III Dreamer will go toward helping the HCP accomplish its noble mission.


ENGINEER III DREAMER
Pre-order now at a limited-time price until 9 January 2019. Orders ship between May 2019 and June 2019, subject to Swiss product schedule and shipment. Officially available at full retail price beginning in July 2019.
Engineer III Dreamer, COSC certified, starting at
CHF 1,090* / USD $1,149* (retail: CHF 1,730* / USD $1,799*)
Engineer III Dreamer, non-COSC certified, starting at
CHF 799* / USD $869* (retail: CHF 1,439* / USD $1,519*)
*Taxes not included
SPECIFICATIONS
Engineer III Dreamer 31mm
- Automatic caliber BALL RR1104
- 28 micro gas tubes on hour, minute and second hands and dial for night reading capability
- 5,000Gs shock resistance
- Anti-magnetic to 4,800A/m
- Water resistant to 100m/330ft
- Hours, minutes, sweep seconds, magnified date
- Stainless steel
- Ø 31mm, height 10.7mm
- Anti-reflective sapphire crystal
- Screwed-in crown
- Stainless steel bracelet with folding buckle or calf strap with pin buckle
- Black or blue or green
Engineer III Dreamer 40mm
- Automatic caliber BALL RR1103-C
- Chronometer certified COSC
- Or
- Automatic caliber BALL RR1103
- 28 micro gas tubes on hour, minute and second hands and dial for night reading capability
- 5,000Gs shock resistance
- Anti-magnetic to 80,000A/m
- Water resistant to 100m/330ft
- Hours, minutes, sweep seconds, magnified date
- Stainless steel
- Ø 40mm, height 13.6mm
- Anti-reflective sapphire crystal
- Screwed-in crown
- Stainless steel bracelet with folding buckle or calf strap with pin buckle
- Black or blue or green
Engineer III Dreamer 43mm
- Automatic caliber BALL RR1103-C
- Chronometer certified COSC
- Or
- Automatic caliber BALL RR1103
- 28 micro gas tubes on hour, minute and second hands and dial for night reading capability
- 5,000Gs shock resistance
- Anti-magnetic to 80,000A/m
- Water resistant to 100m/330ft
- Hours, minutes, sweep seconds, magnified date
- Stainless steel or stainless steel with TiC coating
- Ø 43mm, height 13.6mm
- Anti-reflective sapphire crystal
- Screwed-in crown
- Stainless steel bracelet with folding buckle (For stainless steel case only) or calf strap with pin buckle, or rubber strap
- Black or blue or green
FURTHER INSTRUCTIONS AND TERMS
- Kindly note that BALL Watch Co. must receive full payment before accepting and processing the order.
- VISA, MasterCard and American Express are accepted.
- After online reservation, you will receive an email confirmation if your order is accepted.
- Delivery will be made between May 2019 and June 2019 (subject to the Swiss production schedule and shipment) and will be made through the agreed-upon retailer near you or via direct shipment, subject to the country of destination.
- Upon watch delivery from the Swiss office to your country, our local customer service representative will contact you on behalf of BALL Watch Co. to further discuss the watch delivery arrangements.
- No cancellations or changes of order details or engraving will be accepted after 3 days of the purchase date.
- General terms and conditions can be found at shop.ballwatch.ch. Different collection methods and service terms may apply to different countries. Please inquire of our local office for details.
- BALL Watch Co. reserves all rights in case of any disputes.
- Non-refundable handling charges may be charged by your bank when payment is made by a credit card.
PERSONALISED CASE BACK ENGRAVING
- Only alphanumeric characters, spaces and punctuation are allowed.
- Special characters, letters with accent marks and non-English letters will not be engraved.
- Laser engraving is limited to one line and up to 11 characters, including spaces.
- All text is centred to fit the space.
- Capital letters are suggested for easy legibility.
- All engravings on the case back are performed according exactly to the confirmation email sent by BALL Watch Co., including upper and lower cases, spelling and spacing.



